العربية
RS-FS-9001 GE Module Parts Flame Tracker UV Flame Sensor
The GE Reuter-Stokes RS-FS-9001 is a Flame Tracker™ silicon carbide (SiC) ultraviolet flame sensor designed for industrial combustion monitoring and turbine flame detection applications.
It uses a silicon carbide photodiode to detect ultraviolet radiation emitted by a flame and converts the detected flame intensity into a 4-20 mA DC output signal. The sensor provides a response time of less than 25 milliseconds, allowing combustion control systems to quickly identify flame changes or flame loss.
The RS-FS-9001 is designed for demanding industrial environments and is commonly used in gas turbines, industrial burners, and power generation facilities.
| Parameter | Specification |
|---|---|
| Manufacturer | GE Reuter-Stokes |
| Product Model | RS-FS-9001 |
| Product Name | Flame Tracker™ |
| Product Type | UV Flame Sensor / Flame Detector |
| Detection Technology | Silicon Carbide (SiC) Photodiode |
| Detection Principle | Ultraviolet flame radiation |
| Output Signal | 4-20 mA DC |
| Maximum Output | Less than 21 mA |
| Supply Voltage | 12-30 VDC |
| Power Requirement | Greater than 100 mA |
| Response Time | Less than 25 ms |
| Sensitivity | Greater than 5 mA at 1 × 10¹⁰ photons/in²/sec at 310 nm |
| Process Connection | 3/4-inch NPT female |
| Electrical Connector | MIL-C-38999 Series III, Size 15, 5-pin |
| Sensor Window | Sapphire |
| Body Material | AISI 316 Stainless Steel |
| Housing Material | AISI 304 Stainless Steel |
| Operating Temperature | -40°C to +150°C |
| High-Temperature Operation | Up to +235°C with specified water cooling |
| Process Pressure | Up to 400 psig (2.8 MPa) |
| Relative Humidity | 100%, non-condensing |
| Mounting | Direct process mounting |
| Typical Application | Gas turbines, burners, and combustion systems |
The SiC photodiode technology provides a dedicated ultraviolet flame-detection method for industrial combustion applications.
The sub-25 ms response time helps the control system identify rapid changes in flame conditions.
The 4-20 mA output is suitable for compatible industrial analog input systems and combustion monitoring equipment.
The stainless steel construction, sapphire window, and high-temperature options make the sensor suitable for demanding installation locations.
The standard process connection and industrial electrical connector support integration into appropriately designed flame-monitoring assemblies.
The GE RS-FS-9001 is a Reuter-Stokes Flame Tracker UV flame sensor that uses a silicon carbide photodiode to detect ultraviolet radiation from industrial combustion flames.
It provides a 4-20 mA DC analog output corresponding to detected flame intensity.
The specified supply voltage is 12-30 VDC, with a power requirement greater than 100 mA.
GE Flame Tracker UV Sensor
,RS-FS-9001 Flame Sensor Module
,GE Module Parts UV Sensor
Miss. Liliya
- Email: massive2026168@gmail.com
- Tel: +65 8056 0440
-
WhatsApp:
6580560440
-
V7768-322000 GE Module Parts Intel Core 2 Duo/Celeron M VME Single Board Computer
GE V7768-322000 VME SBC features Intel Core 2 Duo up to 2.16GHz, 2GB DDR2, dual GbE, and PCI-X PMC expansion. Built in USA for demanding industrial use with 1-year warranty and wide compatibility. -
IS420UCSCH2A-C-V0.1-A GE Module Parts Mark VIe Controller Module
GE Mark VIe UCSC controller with dual-core 1.6 GHz processor for real-time power conversion control. UL, CE, RoHS certified, 120-240V, -20°C to 85°C. Supports IONet and three HSSL interfaces. 1-year warranty. -
ABB HPC800K02 Controller Kit | Industrial Process Controller for Symphony Plus
The ABB HPC800K02 industrial controller kit delivers high-performance process control for Symphony Plus/Harmony systems. Features modular scalability, redundant communication, and industrial-grade reliability with CE, UL, and RoHS certifications. Ideal for power, manufacturing, and water treatment automation.
