IS220PPRFH1B GE Module Parts PROFIBUS Master Gateway I/O Module

Product Summary
GE IS220PPRFH1B PROFIBUS Master Gateway I/O Pack for Mark VIe systems. Features Hilscher COM-C module, DP-V0 Class 1 Master, up to 125 slaves, 12 Mbaud speed, dual RJ45 IONet, conformal coating, and hot-backup redundancy support for reliable turbine control.
Product Description
Product Overview

The GE IS220PPRFH1B is a PROFIBUS Master Gateway I/O Pack designed for the GE Mark VIe Speedtronic turbine control system.

The module provides a communication interface between the Mark VIe controller's Ethernet-based IONet network and external PROFIBUS-DP field devices. It operates as a PROFIBUS DP-V0 Class 1 Master, enabling the controller to exchange process data with distributed PROFIBUS slave devices.

The IS220PPRFH1B integrates a processor board and a PROFIBUS communication interface supplied by Hilscher. It supports industrial communication with remote I/O stations, drives, sensors, actuators, and other automation equipment.

It is widely applicable in gas turbine control, steam turbine automation, power generation, and industrial process control.

Technical Specifications
Parameter Specification
ManufacturerGeneral Electric (GE)
ModelIS220PPRFH1B
Functional AcronymPPRF
Part NumberIS220PPRFH1B
Product SeriesMark VIe
Product TypePROFIBUS Master Gateway I/O Pack
Processor BoardBPPC
Communication ModuleHilscher COM-C
PROFIBUS ProtocolPROFIBUS DP-V0
Master TypeClass 1 Master
Physical InterfaceRS-485
PROFIBUS ConnectorDE-9 D-sub
Maximum Slave DevicesUp to 125
Data CapacityUp to 244 bytes input/output per slave
Communication Speed9.6 kbaud–12 Mbaud
Ethernet InterfaceDual RJ45
Ethernet NetworkGE IONet
Ethernet Speed10/100 Mbps
Nominal Power Supply28 VDC
Supply Voltage Range27.4–28.6 VDC
Maximum Input Current0.18 A DC
Operating Temperature-20°C to +55°C
PCB ProtectionConformal coating
MountingDirect terminal-board mounting
Compatible Terminal BoardIS200SPIDG1A
RedundancySimplex and hot-backup configurations
Engineering SoftwareGE ToolboxST / ControlST
GE IS220PPRFH1B PROFIBUS Master Gateway I/O Module front view
Main Functions
1. PROFIBUS-DP Master Communication

Operates as a PROFIBUS DP-V0 Class 1 Master, controlling communication with connected PROFIBUS slave devices.

2. Ethernet-to-PROFIBUS Gateway

Connects the GE Mark VIe IONet network with external PROFIBUS field networks, allowing process data to be exchanged between different automation systems.

3. Distributed I/O Data Acquisition

Collects input data from PROFIBUS slave devices and transfers it to the Mark VIe controller.

4. Remote Device Control

Transfers output commands from the Mark VIe controller to compatible PROFIBUS slave devices.

5. Communication Diagnostics

Provides communication status and diagnostic information to help identify network faults and slave-device communication problems.

6. Redundant Communication Support

Supports hot-backup configurations using two PPRF modules, improving communication availability in critical applications.

Installation and Commissioning
  1. Verify the module model IS220PPRFH1B and hardware revision.
  2. Confirm compatibility with the IS200SPIDG1A terminal board.
  3. Check the 28 VDC power supply.
  4. Mount the I/O Pack onto the designated terminal board.
  5. Connect the PROFIBUS network through the DE-9 connector.
  6. Connect the Ethernet cables to the Mark VIe IONet network.
  7. Configure PROFIBUS slave addresses and communication parameters.
  8. Configure the PROFIBUS network and device data mapping using the GE engineering environment.
  9. Verify communication with all configured slave devices.
GE IS220PPRFH1B module installed on terminal board with PROFIBUS and Ethernet connections
Frequently Asked Questions
Q1: What is the GE IS220PPRFH1B used for?

It is a PROFIBUS Master Gateway I/O Pack used to connect PROFIBUS-DP field devices to GE Mark VIe turbine control systems.

Q2: Which communication protocol does it support?

It supports PROFIBUS DP-V0 Class 1 Master communication.

Q3: How many PROFIBUS slave devices can it support?

It supports up to 125 PROFIBUS slave devices, subject to the network configuration and system data-capacity limits.

Q4: What is the maximum communication speed?

The supported PROFIBUS transmission rate ranges from 9.6 kbaud to 12 Mbaud.

Q5: What is the power supply requirement?

The module requires a nominal 28 VDC supply, with a specified maximum current consumption of 0.18 A.

Product Details
Highlight:

PROFIBUS Master Gateway I/O Module

,

GE Module Parts PROFIBUS Gateway

,

IS220PPRFH1B I/O Module

Current: 10A
Material: High-grade Plastic And Metal
Product Type: Module Parts
Operatingtemperaturerange: -10°C To 60°C
Voltage: 110V - 240V
Operatingtemperature: -40°C To 85°C
Color: Black / Grey
Manufacturer: General Electric

Miss. Liliya

Related Products
  • ABB PFSA145 3BSE008843R1 | Power Filter / Transformer for PFSA105 Tension Systems

    ABB PFSA145 3BSE008843R1 power filter/transformer for PFSA105 tension systems. Durable, efficient, IEC/UL certified, operates -40~150°C. Original ABB spare part ensures compatibility and reduced downtime. Confirm specs before purchase.
  • IS220PPRAS1A GE Module Parts Safety-Rated Emergency Turbine Protection I/O Pack

    The GE IS220PPRAS1A is an IEC 61508-certified safety-rated Emergency Turbine Protection I/O Pack for Mark VIeS systems. It delivers independent backup overspeed protection with six speed inputs (three pairs), emergency trip monitoring, and dual Ethernet communication. Built for durability in -30°C to +65°C environments, it ensures reliable, efficient turbine safety.
  • PFCL201CE-50KN ABB Pressductor Pillow Block Load Cell | 3BSE027062R50

    ABB PFCL201CE-50KN (3BSE027062R50) Pressductor load cell: monoblock stainless steel, 50kN nominal load, 1000% overload capacity, fixed cable with protective hose for vibration resistance. Ideal for rolling mills and tension measurement. Compatible with PFEA/Millmate controllers. Datasheet and quotes available.
Send An Inquiry