IS215WEPAH2BB GE Module Parts Pitch Control Analog I/O PCB / Plug-in Rack Module

Product Summary
GE IS215WEPAH2BB Pitch Control Analog I/O PCB for Mark VIe wind turbines. Features 125 VDC power, -40°C to 70°C range, 50A rating, and TMR redundancy support. UL/CE certified with 1-year warranty and conformal coating for durability.
Product Description
Product Parameters & Specifications
BrandGeneral Electric (GE)
ManufacturerGE Vernova / GE Power Energy Division
Part NumberIS215WEPAH2BB
Functional AcronymWEPA (Wind Energy Pitch Axis)
SeriesMark VI / Mark VIe Speedtronic Wind Turbine Control System
Board TypePitch Control Analog I/O PCB / Plug-in Rack Module
Compatible RackMark VIe VME control rack (13-slot or 21-slot)
Communication InterfaceIONet / UDH backplane bus; serial COM ports; Ethernet where specified
Redundancy ArchitectureSimplex, Dual Redundant, or Triple Modular Redundancy (TMR)
Control Frame Rate10 ms / 20 ms / 40 ms software-configurable
Field SignalsPitch position analog feedback, encoder input, servo drive command, discrete fault contact inputs
OutputsRelay / transistor discrete outputs with onboard relays K1–K8
Analog ChannelsIsolated 4–20 mA analog input/output for position, torque, and temperature feedback
IsolationGalvanic isolation between field circuits and backplane logic
Surge ProtectionIntegrated Metal Oxide Varistors (MOVs) onboard
Protective TreatmentConformal coated PCB (G3 environmental protection)
Power Supply125 VDC nominal (operating range 110–140 VDC)
Operating Temperature-40 °C to +70 °C
Storage Temperature-40 °C to +70 °C
Humidity5–95% non-condensing
ConnectorsMulti-pin female plug connectors along the board edge (2 to 20 pin)
MountingSingle-slot VME rack mount, with daughterboard expansion support
Country of OriginUnited States
GE IS215WEPAH2BB pitch control analog I/O PCB module, front view showing edge connectors and onboard relays
Technical Specifications
  • Signal Processing: Analog and discrete signal conditioning for blade pitch control loops
  • Feedback Types: Differential encoder, 4–20 mA analog, and contact-status inputs
  • Drive Compatibility: Electric and hydraulic pitch actuators / servo drives
  • Network: Fault-tolerant redundant IONet industrial bus to the turbine controller
  • Software: Programmable application software with password-protected access levels; supports online updates while the process runs
  • Diagnostics: Status indication and field contact monitoring for pitch system faults
  • Mechanical: Standard single-slot VME PCB with edge connectors and terminal blocks
  • Environmental: Conformal coating and isolation rated for continuous turbine nacelle and cabinet operation
  • Compatibility: Designed for Mark VIe wind turbine distributed control system (DCS) installations
Typical Applications
  • Wind turbine blade pitch control and pitch axis monitoring
  • Wind farm turbine distributed control systems (DCS)
  • Pitch position feedback and servo drive command loops
  • Electric and hydraulic pitch actuator control
  • Redundant and TMR wind turbine safety control cabinets
  • Nacelle and base-cabinet I/O interface boards
  • Wind power maintenance, retrofit, and spare-part replacement
  • Mark VIe control system expansion and life-cycle support
GE IS215WEPAH2BB module installed in a Mark VIe VME control rack within a wind turbine control cabinet
Product Uses
  • Condition and transmit blade pitch position, torque, and temperature feedback to the controller
  • Issue analog and discrete control commands to pitch servo drives and actuators
  • Monitor discrete fault and limit contacts within the pitch system
  • Interface encoder and analog field signals with the Mark VIe control rack
  • Provide redundant communication and control in high-availability turbine architectures
  • Serve as a replacement board for existing WEPA-controlled wind turbine installations
  • Support wind farm modernization, maintenance, and spare inventory programs
Warranty

We provide a 12-month limited warranty for the GE IS215WEPAH2BB module. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, we offer free repair or replacement for qualified faulty units. Every board is fully tested and inspected before shipment.

The warranty does not cover damage caused by improper installation, overvoltage, short circuits, physical impact, moisture or corrosion, unauthorized repair or modification, ESD handling damage, or abnormal industrial abuse. Technical support is available for product consultation, wiring guidance, and fault diagnosis.

Frequently Asked Questions (FAQ)
Q1: What system is the IS215WEPAH2BB compatible with?

It is designed for the GE Mark VI / Mark VIe Speedtronic wind turbine control platform and connects via the IONet / UDH backplane bus.

Q2: What does WEPA stand for?

WEPA refers to Wind Energy Pitch Axis, the board's functional designation for wind turbine pitch control.

Q3: Does the board support redundant configurations?

Yes. It supports Simplex, Dual Redundant, and Triple Modular Redundancy (TMR) architectures for high-availability wind turbine control.

Q4: What control frame rates are available?

The board supports configurable software frame rates of 10 ms, 20 ms, and 40 ms for input conditioning, processing, and output transmission.

Q5: What power supply does it require?

The board operates on a nominal 125 VDC supply, within an operating range of 110–140 VDC. Verify the supply rating against your original OEM documentation before installation.

Q6: What field signals does it handle?

It handles pitch position analog feedback, encoder inputs, servo drive commands, discrete fault contacts, and 4–20 mA analog feedback for position, torque, and temperature.

Related Products
Product Details
Highlight:

GE Pitch Control Analog I/O PCB

,

GE Plug-in Rack Module Parts

,

IS215WEPAH2BB Analog I/O Module

Warranty: 1 Year Limited Warranty
Certifications: UL Listed, CE Certified
Dimensions: Varies By Part
Voltage: 120V / 240V
Connectortype: Screw Terminal / Plug-in
Current Rating: 50A
Compatibility: GE Module Systems
Operatingtemperature: -20°C To 70°C
Operatingtemperaturerange: -20°C To 70°C
Category: Electrical Components
Parttype: Module
Producttype: Module Parts
Installationtype: Snap-in
Manufacturer: General Electric
Connectiontype: Screw Terminal

Miss. Liliya

Related Products
Send An Inquiry