IS215UCVHM06A IS200PMCIH1ACC GE Module Parts VME 6U Main Controller Assembly in Stock

Product Summary
GE Mark VI VME 6U main controller assembly with high-speed CPU, TMR redundancy, and conformal-coated PCB for turbine control. Supports simplex/TMR, IONet communication, and -40°C to 150°C operation. In stock with 12-month warranty.
Product Description
Product Parameters & Specifications
BrandGeneral Electric (GE)
ManufacturerGE Vernova
Part NumberIS215UCVHM06A — Full UCV main board assembly
IS200PMCIH1ACC — PMCI core base PCB (sub-board of UCV)
Functional AcronymUCV (Universal Control VME), PMCI (Processor / Power Management Control Interface Sub-card)
SeriesMark VI Speedtronic Turbine Control System
Module TypeVME 6U Main Controller Assembly
ProcessorHigh-speed embedded real-time CPU for turbine control
MemoryOnboard RAM + Flash for firmware, control logic and event logs
Backplane InterfaceVME 6U bus
NetworkCommunicates with rack VCMI over IONet
Redundancy SupportSimplex and Triple Modular Redundancy (TMR)
PCB ProtectionConformal coated
Power Supply28 VDC supplied from VME backplane
Operating Temperature0 °C ~ +60 °C
Storage Temperature-40 °C ~ +85 °C
Humidity10–95% non-condensing
Diagnostic IndicatorsRUN, FAIL, STATUS, COMM LED indicators
MountingStandard Mark VI VME rack slot installation
Country of OriginUnited States
GE IS215UCVHM06A VME 6U main controller assembly with IS200PMCIH1ACC PMCI core base PCB
Technical Specifications
  • Core Function: Executes turbine start-up sequence, fuel control, speed control, exhaust temperature control, load control and protection algorithms.
  • TMR Function: Three-way signal comparison and voting in redundant control cabinets.
  • Communication: Exchanges real-time data with VCMI, local I/O boards and remote expansion racks.
  • Diagnostics: Built-in watchdog, continuous self-test, fault logging and mismatch alarm for TMR.
  • Form Factor: 6U VME single-slot plug-in controller assembly.
  • System Role: Main processor of the Mark VI rack; the IS200PMCIH1ACC is its internal core PCB.
  • Firmware: Mark VI turbine control firmware, downloaded via VCMI serial port or IONet.
  • Variant Note: The IS200PMCIH1ACC is the PCB sub-component; it cannot run independently and must be assembled into the full IS215UCVHM06A assembly.
Typical Applications
  • Gas turbine Mark VI main control rack core controller
  • Steam turbine control and protection system
  • Combined cycle power plant unit control cabinets
  • TMR redundant turbine control and protection cabinets
  • Power plant spare replacement, system retrofit and overhaul
  • Oil & gas turbine-driven compressor control systems
  • Critical rotating machinery safety and regulation control
Product Uses
  • Run the main turbine control program and protection interlock logic
  • Process analog and digital feedback signals from all I/O packs
  • Execute closed-loop control of speed, fuel stroke, temperature and generator load
  • Complete TMR voting and signal comparison in triple redundant cabinets
  • Transmit real-time control data to VCMI and exchange data via the IONet network
  • Store trip events, alarm logs and unit operating parameters
  • IS200PMCIH1ACC is the core circuit board of the UCV assembly; replacement usually requires the whole IS215UCVHM06A assembly
  • Serve as a direct drop-in replacement spare for existing Mark VI UCV racks
  • Support unit commissioning, parameter tuning and long-term safe operation
GE IS215UCVHM06A UCV controller assembly and IS200PMCIH1ACC PMCI sub-board detail view
Warranty

We provide a 12-month limited warranty for the GE IS215UCVHM06A assembly. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.

The warranty does NOT cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance and fault diagnosis.

Frequently Asked Questions (FAQ)
Q1: Which control system are these parts compatible with?

They belong to the GE Mark VI Speedtronic turbine control system, UCV main controller assembly.

Q2: What is the relationship between IS215UCVHM06A and IS200PMCIH1ACC?

IS215UCVHM06A is the complete UCV controller assembly; IS200PMCIH1ACC is the internal core PMCI base PCB sub-board installed on the UCV main board. It is not an independent standalone module.

Q3: What is UCV?

UCV stands for Universal Control VME, the main CPU processor board for Mark VI racks.

Q4: Can IS200PMCIH1ACC be used alone?

No. It is a sub PCB and must be assembled into the full IS215UCVHM06A assembly to work.

Q5: Does this UCV support TMR redundant configuration?

Yes, it supports simplex and Triple Modular Redundancy (TMR) architecture.

Q6: Does UCV work without VCMI?

No. The same rack must have a VCMI board to handle VME bus arbitration and IONet communication.

Related Products
Product Details
Highlight:

GE VME 6U Controller Assembly

,

IS215UCVHM06A GE Module Parts

,

IS200PMCIH1ACC Main Controller

Moduletype: Power Module
Installationtype: Panel Mount / DIN Rail
Material: High-grade Plastic And Metal
Connectiontype: Screw Terminal
Application: Industrial Automation And Control
Operatingtemperaturerange: -40°C To 150°C
Connectortype: Standard GE Module Connector
Voltage: 110V - 240V

Miss. Liliya

Related Products
Send An Inquiry