IS215UCVGH1A GE Module Parts UCVG Universal Control Variable Generator / VME Single Board Controller

Product Summary
GE IS215UCVGH1A UCVG VME controller for Mark VI turbine systems. Features 650MHz CPU, dual Ethernet, Modbus TCP, and 1-year warranty. Reliable real-time control with IEC, UL, CE certifications. Conformal coating optional for harsh environments.
Product Description
Technical Specifications
BrandGeneral Electric (GE)
Part NumberIS215UCVGH1A
Product TypeUCVG Universal Control Variable Generator / VME Single Board Controller
SeriesSpeedtronic Mark VI Turbine Control System
Form Factor6U VMEbus single slot
ProcessorIntel Ultra Low Voltage Celeron 650 MHz
Memory128 MB SDRAM, 128 MB Flash Memory
Operating SystemQNX Real-time Operating System
Communication Interfaces2 × 10/100BaseTX Ethernet (RJ45), 2 × RS232 serial ports
Front Panel PortsSVGA video, PS/2 keyboard & mouse, USB, reset button
ExpansionPMC expansion slot
Supported ProtocolsEGD, Modbus TCP, TCP/IP
Power Supply+5 Vdc from VME backplane
Operating Temperature0 °C ~ 70 °C
Storage Temperature-40 °C ~ 80 °C
MountingVME rack mount
DiagnosticOnboard status LED indicators for system, network and fault status
Conformal CoatingOptional for corrosive environments
CompatibilityMark VI Innovation G and H controller racks
IS215UCVGH1A GE UCVG Universal Control Variable Generator VME single board controller front panel view
Product Purpose

The IS215UCVGH1A functions as the core real-time processing and communication controller inside GE Mark VI turbine control racks. It runs turbine sequence control, closed-loop regulation, safety protection and interlock logic, computes universal control variables, transmits real-time operating data to SCADA and HMI, and communicates with distributed I/O boards through the VME bus and Ethernet. This module is designed for direct replacement, routine maintenance, retrofit and capacity expansion of existing Mark VI control systems in power plants and oil & gas facilities.

Typical Applications
  • Combined cycle power plant gas turbine control
  • Thermal power station steam turbine control and protection
  • Generator excitation and load control
  • Oil & gas compressor anti-surge control and pipeline monitoring
  • Refinery and petrochemical critical process control
  • Balance-of-plant auxiliary equipment control system
  • Spare replacement and upgrade of GE Speedtronic Mark VI control system
  • Industrial heavy machinery safety interlock and sequence control
IS215UCVGH1A GE Mark VI UCVG controller module installed in VME rack application view
Warranty

We provide a 12-month limited warranty for new surplus genuine IS215UCVGH1A units from the date of delivery. The warranty covers manufacturing defects and hardware functional failure under proper installation and normal operating conditions. Warranty excludes damage caused by improper installation, overvoltage, short circuit, lightning strike, unauthorized disassembly, modification, corrosive atmosphere, physical impact, over-temperature and misuse. Refurbished modules carry a 6-month limited warranty. Every unit undergoes full functional testing before shipment.

Frequently Asked Questions
Q1: Which control system is the IS215UCVGH1A compatible with?

A1: It is designed for the GE Speedtronic Mark VI turbine control system and is compatible with Mark VI Innovation G and H controllers.

Q2: What is the difference between the IS215UCVGH1A and the IS215UCVGM06A?

A2: The IS215UCVGH1A and IS215UCVGM06A belong to the same UCVG family for Mark VI. The IS215UCVGH1A is assembled based on VMIVME-7666 hardware; the IS215UCVGM06A is another variant with different firmware and assembly configuration. They are not directly interchangeable without GE configuration verification.

Q3: Does the IS215UCVGH1A support Modbus TCP communication?

A3: Yes, it supports Modbus TCP over Ethernet for connection with third-party DCS and HMI systems.

Q4: Can this VME board be hot-swapped while the rack is powered on?

A4: Hot swap is not recommended. Please follow the GE official shutdown procedure before removing or installing the module to avoid VME bus damage and system trip.

Q5: Does the standard unit come with conformal coating?

A5: The standard version has no conformal coating. A conformal coated version is available for coastal, high humidity and salt-spray corrosive sites.

Q6: Does this listing include GE configuration software and license?

A6: Only the hardware module is included. GE ToolboxST software and license are not supplied with the board.

Related Products
Product Details
Highlight:

GE UCVG variable generator module

,

VME single board controller

,

GE Module Parts controller

Product Type: Module Parts
Current: 10A
Application: Industrial Automation And Control
Connectortype: Screw Terminal / Plug-in
Compliancestandards: IEC, UL, CE Certified
Switchingfrequency: 20kHz
Warranty: 1 Year Limited Warranty
Current Rating: Up To 30A

Miss. Liliya

Related Products
  • ABB PFTL101B-2.0kN 3BSE004185R1 Pressductor PillowBlock Load Cell

    The ABB PFTL101B-2.0kN (3BSE004185R1) Pressductor PillowBlock load cell offers 500% overload protection, 0.5% FS accuracy, and IP66/67 rating. Its patented magnetoelastic technology eliminates mechanical fatigue, ensuring long-term stability for CD102 offset printers and web tension control.
  • ABB PFTL101B-5.0kN 3BSE004191R1 Pressductor Load Cell | In Stock

    ABB PFTL101B-5.0kN Pressductor load cell offers 500% overload capacity, 0.5% FS accuracy, and fatigue-free magnetoelastic technology for reliable web tension control. In stock with 1-year warranty.
  • ABB PFSK164 3BSE021180R1 Safety Relay Module | In Stock

    The ABB PFSK164 3BSE021180R1 Safety Relay Module offers SIL 3/PL e certified reliability with dual-channel redundancy and forced-guided contacts for fail-safe operation. TÜV certified, it features a wide 24V DC to 230V AC input range and clear LED diagnostics, ensuring seamless integration and minimal downtime for critical safety systems.
Send An Inquiry