IS215UCVFH2A GE Module Parts UCV Turbine Controller / VME Single Board Computer New

Product Summary
GE IS215UCVFH2A UCV Turbine Controller for Mark VI systems. Features AMD K6 300MHz, 16MB DRAM, dual Ethernet, Modbus TCP, and -40°C to 85°C rating. IEC, UL, CE certified with 1-year warranty and optional conformal coating for harsh environments.
Product Description
Technical Specifications
BrandGeneral Electric (GE)
Part NumberIS215UCVFH2A
Product TypeUCV Turbine Controller / VME Single Board Computer
SeriesSpeedtronic Mark VI Turbine Control System
Form Factor6U VMEbus single slot
ProcessorAMD K6 300 MHz
Memory16 MB DRAM, 8 MB Flash Memory
Operating SystemQNX Real-time Operating System
Communication Interfaces2 × 10/100BaseTX Ethernet (RJ45), 2 × RS232 serial ports, Genius I/O interface
Front PanelStatus LED indicators, serial communication ports
Supported ProtocolsEGD, Modbus TCP, TCP/IP, Genius Protocol
Power Supply+5 Vdc from VME backplane
Operating Temperature0 °C ~ 70 °C
Storage Temperature-40 °C ~ 80 °C
MountingVME rack mount
DiagnosticOnboard LED indicators for power, system, network and fault status
Conformal CoatingOptional for corrosive, high humidity and salt spray environments
CompatibilityGE Mark VI control racks

Note: The IS215UCVFH2A is an earlier UCV controller variant and uses a different hardware platform from the IS215UCVFH2BB.

IS215UCVFH2A GE UCV Turbine Controller VME single board computer front panel view
Product Purpose

The IS215UCVFH2A serves as the core real-time UCV controller inside GE Mark VI turbine control racks. It executes turbine control applications, safety protection and interlock logic, performs closed-loop speed and load regulation, and transmits real-time operating data to SCADA and HMI systems. It communicates with distributed I/O modules through the VME bus, Ethernet and Genius bus. This unit is designed for direct replacement, routine maintenance, retrofit and capacity expansion of existing Mark VI turbine control systems in power plants, oil & gas and petrochemical facilities.

Typical Applications
  • Combined cycle power plant gas turbine control
  • Thermal power station steam turbine control and protection
  • Generator excitation, speed and load control
  • Oil & gas compressor anti-surge control and pipeline monitoring
  • Refinery and petrochemical critical process control
  • Balance-of-plant auxiliary equipment control
  • Spare replacement and upgrade of GE Speedtronic Mark VI control system
  • Industrial heavy machinery safety interlock and sequence control
IS215UCVFH2A GE Mark VI UCV controller module installed in VME rack application view
Warranty

We provide a 12-month limited warranty for new surplus genuine IS215UCVFH2A units from the date of delivery. The warranty covers manufacturing defects and hardware functional failure under proper installation and normal operating conditions. Warranty excludes damage caused by improper installation, overvoltage, short circuit, lightning strike, unauthorized disassembly, modification, corrosive atmosphere, physical impact, over-temperature and misuse. Refurbished modules carry a 6-month limited warranty. Every unit undergoes full functional testing before shipment.

Frequently Asked Questions
Q1: Which control system is the IS215UCVFH2A compatible with?

A1: It is designed for the GE Speedtronic Mark VI turbine control system.

Q2: What is the difference between the IS215UCVFH2A and the IS215UCVFH2BB?

A2: Both are UCV controllers for Mark VI, but they use different hardware platforms. The IS215UCVFH2A uses an AMD K6 300 MHz processor; the IS215UCVFH2BB uses a Pentium III 850 MHz processor. They are not directly interchangeable without GE configuration verification.

Q3: Does the IS215UCVFH2A support Modbus TCP communication?

A3: Yes, it supports Modbus TCP over Ethernet for connection with third-party DCS and HMI systems.

Q4: Can this VME board be hot-swapped while the rack is powered on?

A4: Hot swap is not recommended. Please follow the GE official shutdown procedure before removing or installing the module to avoid VME bus damage and system trip.

Q5: Does the standard unit come with conformal coating?

A5: The standard version has no conformal coating. A conformal coated version is available for coastal, high humidity and salt-spray corrosive sites.

Q6: Does this listing include GE configuration software and license?

A6: Only the hardware module is included. GE ToolboxST software and license are not supplied with the board.

Related Products
Product Details
Highlight:

GE UCV Turbine Controller

,

VME Single Board Computer

,

GE Module Parts New

Current Rating: 50A
Thermalresistance: 0.3°C/W
Operatingtemperature: -40°C To 85°C
Switchingfrequency: 20kHz
Product Type: Module Parts
Warranty: 1 Year Limited Warranty
Packagetype: IGBT Module
Compliancestandards: IEC, UL, CE Certified

Miss. Liliya

Related Products
Send An Inquiry