IS215UCVEM06A GE Module Parts UCV Turbine Controller / VME Single Board Computer New

Product Summary
GE IS215UCVEM06A UCV Turbine Controller for Mark VI systems. Features Intel Celeron 300MHz, 32MB DRAM, dual Ethernet, and Modbus TCP. Durable, with 12-month warranty and optional conformal coating for harsh environments. Ideal for power plant retrofits and spare replacement.
Product Description
Technical Specifications
BrandGeneral Electric (GE)
Part NumberIS215UCVEM06A
Product TypeUCV Turbine Controller / VME Single Board Computer
SeriesSpeedtronic Mark VI Turbine Control System
Form Factor6U VMEbus single slot
ProcessorIntel Celeron 300 MHz
Memory32 MB DRAM, 128 MB Flash Memory
Operating SystemQNX Real-time Operating System
Communication Interfaces2 × 10/100BaseTX Ethernet (RJ45), 2 × RS232 serial ports
Front Panel PortsSVGA video, PS/2 keyboard & mouse, USB, reset button, status LED indicators
Supported ProtocolsEGD, Modbus TCP, TCP/IP
Power Supply+5 Vdc from VME backplane
Operating Temperature0 °C ~ 70 °C
Storage Temperature-40 °C ~ 80 °C
MountingVME rack mount
DiagnosticOnboard LED indicators for power, system, network and fault status
Conformal CoatingOptional for corrosive, high humidity and salt spray environments
CompatibilityGE Mark VI control racks
Note: This unit belongs to the early UCVEM controller family and is not directly interchangeable with UCVGM or later UCVEM08 / UCVEM09 series without GE configuration verification.
Product Purpose

The IS215UCVEM06A serves as the core real-time UCV controller inside GE Mark VI turbine control racks. It executes turbine control applications, safety protection and interlock logic, performs closed-loop speed and load regulation, and transmits real-time operating data to SCADA and HMI systems. It communicates with distributed I/O modules through the VME bus and Ethernet.

This unit is designed for direct replacement, routine maintenance, retrofit and capacity expansion of existing Mark VI turbine control systems in power plants, oil & gas and petrochemical facilities.

GE IS215UCVEM06A UCV Turbine Controller VME Single Board Computer for Speedtronic Mark VI systems
Typical Applications
  • Combined cycle power plant gas turbine control
  • Thermal power station steam turbine control and protection
  • Generator excitation, speed and load control
  • Oil & gas compressor anti-surge control and pipeline monitoring
  • Refinery and petrochemical critical process control
  • Balance-of-plant auxiliary equipment control
  • Spare replacement and upgrade of GE Speedtronic Mark VI control system
  • Industrial heavy machinery safety interlock and sequence control
Warranty

We provide a 12-month limited warranty for new surplus genuine IS215UCVEM06A units from the date of delivery. The warranty covers manufacturing defects and hardware functional failure under proper installation and normal operating conditions.

Warranty excludes damage caused by improper installation, overvoltage, short circuit, lightning strike, unauthorized disassembly, modification, corrosive atmosphere, physical impact, over-temperature and misuse. Refurbished modules carry a 6-month limited warranty. Every unit undergoes full functional testing before shipment.

Frequently Asked Questions
Q1: Which control system is IS215UCVEM06A compatible with?

A1: It is designed for the GE Speedtronic Mark VI turbine control system. It cannot be directly used for Mark VIe systems.

Q2: What is the difference between IS215UCVEM06A and IS215UCVGM06A?

A2: Both are Mark VI controller boards, but they belong to different product families. IS215UCVEM06A is a UCV processor; IS215UCVGM06A is a UCVG control variable generator module. They have different firmware and functions and are not interchangeable.

Q3: Does IS215UCVEM06A support Modbus TCP communication?

A3: Yes, it supports Modbus TCP over Ethernet for connection with third-party DCS and HMI systems.

Q4: Can this VME board be hot-swapped while the rack is powered on?

A4: Hot swap is not recommended. Please follow the GE official shutdown procedure before removing or installing the module to avoid VME bus damage and system trip.

Q5: Does the standard unit come with conformal coating?

A5: The standard version has no conformal coating. A conformal coated version is available for coastal, high humidity and salt-spray corrosive sites.

Q6: Does this listing include GE configuration software and license?

A6: Only the hardware module is included. GE ToolboxST software and license are not supplied with the board.

Related Products
Product Details
Highlight:

GE VME Single Board Computer

,

UCV Turbine Controller Module

,

IS215UCVEM06A GE Module Parts

Countryoforigin: USA
Moduletype: Power Module
Connectortype: Screw Terminal / Plug-in
Module Type: Power Module
Operatingtemperature: -20°C To 60°C
Weight: 2.5 Lbs
Temperaturerange: -40°C To 85°C
Voltage Rating: 12V To 48V DC

Miss. Liliya

Related Products
Send An Inquiry