IS220PAICH1A 336A4940CSP3 GE Module Parts Analog I/O Pack New
The GE IS220PAICH1A (assembly code 336A4940CSP3) is an analog I/O pack engineered for the Mark VIe Speedtronic turbine control system. It combines up to 10 analog input channels with 2 analog output channels, providing a flexible interface between field instrumentation and the Mark VIe controller. The module supports Simplex and Triple Modular Redundancy (TMR) architectures, making it suitable for high-availability power generation and heavy industrial control applications.

| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Industrial Systems, USA |
| Part Number | IS220PAICH1A |
| Assembly / Drawing Code | 336A4940CSP3 |
| Functional Acronym | PAIC |
| Series | Mark VIe Speedtronic Turbine Control System |
| Analog Input Channels | Up to 10 channels |
| Analog Output Channels | 2 channels |
| Input Signal Range | ±5 V, ±10 V, 0–20 mA, 4–20 mA (configurable current inputs) |
| Output Signal Type | 0–20 mA / 4–20 mA current output |
| Transmitter Power | Supplies 24 VDC field transmitter power |
| A/D Resolution | 16-bit |
| Communication Interface | Dual RJ45 10/100 Mbps Ethernet ports; IR infrared local diagnostic port |
| Field Connector | DC-37 pin D-sub connector to terminal board |
| Power Supply | 27.4 VDC minimum, 28.0 VDC nominal, 28.6 VDC maximum |
| Redundancy Support | Simplex or Triple Modular Redundancy (TMR) |
| Diagnostic Indicators | POWER, ATTN, LINK/ENET1, LINK/ENET2 LEDs |
| Protective Treatment | Conformal coated PCB |
| Operating Temperature | -30 °C to +65 °C (-22 °F to +149 °F) |
| Humidity | 5–95% non-condensing |
| Compatible Terminal Boards | IS200STAIH1A, IS200STAIH2A, IS200TBAIH1C |
| Certifications | UL E207865; ANSI/ISA 12.12.01-2015; Class I, Div. 2, Groups A/B/C/D; ATEX Zone 2 IIC (where applicable) |
| Installation | Standard VME rack mount (13-slot or 21-slot racks) |
| Country of Origin | United States |

- Gas turbine control and monitoring systems
- Steam turbine automation, speed control, and protection
- Power generation distributed control systems (DCS)
- Analog sensor signal acquisition and process feedback
- High-availability redundant industrial process control
- Mark VIe redundant and TMR control cabinet I/O
- Power plant auxiliary equipment monitoring and regulation
- Heavy industry closed-loop analog control loops

- Interface field analog sensors (pressure, temperature, speed, flow, level, vibration) with the Mark VIe controller
- Convert field analog signals into digital values for control logic and data acquisition
- Output analog control signals to actuators, valves, and drives
- Provide powered loops for 2-wire field transmitters
- Extend distributed I/O over Ethernet within turbine and plant control cabinets
- Serve as a drop-in replacement or spare module for existing Mark VIe installations
- Support retrofit, maintenance, and system expansion projects
We provide a 12-month limited warranty for the GE IS220PAICH1A (336A4940CSP3) module. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, we offer free repair or replacement for qualified faulty units. Every module is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuits, physical impact, moisture or corrosion, unauthorized repair or modification, or abnormal industrial abuse. Technical support is available for product consultation, wiring guidance, and fault diagnosis.

It is designed for the GE Mark VIe Speedtronic turbine control system and communicates with the Mark VIe controller over Ethernet.
The PAIC pack provides up to 10 analog input channels and 2 analog output channels.
Approved combinations are the IS200STAIH1A, IS200STAIH2A, and IS200TBAIH1C terminal boards. Approval applies to the complete I/O pack and terminal board combination.
Yes. The module supports both Simplex and Triple Modular Redundancy (TMR) architectures for high-availability applications.
Nominal supply is 28.0 VDC, with an operating range of 27.4 VDC to 28.6 VDC.
Yes. It is approved for hazardous and non-hazardous locations, including Class I, Division 2, Groups A, B, C, D environments, subject to the approved terminal board combination.
336A4940CSP3 is the GE circuit board / assembly drawing code associated with the IS220PAICH1A module.
Yes. All units undergo functional testing and quality inspection prior to delivery.
GE Analog I/O Pack
,IS220PAICH1A Module Parts
,GE Module Parts New
-
IS215VCMIH2C GE Module Parts VME 6U Bus Master Communication Base Board
GE IS215VCMIH2C VME 6U Bus Master Communication Board for Mark VI turbine control. Features TI DSP, 3 IONet ports, TMR redundancy support, and plug-and-play installation. Fully tested with 12-month warranty and technical support. -
ABB PFSA103E 3BSE016268R1 | STU 16-Zone Shape Measurement Unit
ABB PFSA103E 3BSE016268R1 STU unit offers 16-zone shape/tension measurement for industrial lines. Original ABB quality ensures reliable system compatibility and reduced downtime. Verify specs before purchase. -
ABB PFEA113-20 3BSE028144R0020 Tension Electronics | IP20 DIN-Rail Web Tension Controller
The ABB PFEA113-20 3BSE028144R0020 web tension controller offers 4 load cell inputs, 6 analog outputs, and Profibus-DP communication for precise multi-zone tension control. Its IP20 DIN-rail design ensures easy cabinet integration, while built-in diagnostics and ABB PFEA series compatibility make it ideal for upgrades and spare parts stocking in paper, printing, and metal processing lines.