IS215VCMIH2C GE Module Parts VME 6U Bus Master Communication Base Board
The GE IS215VCMIH2C is a VME 6U Bus Master Communication Base Board engineered for the Mark VI Speedtronic turbine control system. As the VME Communication Master Interface (VCMI), it serves as the central communication coordinator within Mark VI control racks, managing data exchange between the CPU and all local I/O boards while supporting both simplex and Triple Modular Redundancy (TMR) architectures.
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Number | IS215VCMIH2C |
| Functional Acronym | VCMI (VME Communication Master Interface) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | VME 6U Bus Master Communication Base Board |
| Processor | TI TMS320C32 32-bit floating-point DSP |
| Dual-Port Memory | 32 KB |
| IONet Ports | 3 × 10Base2 Ethernet ports (R, S, T channels) |
| Diagnostic Port | RS-232 serial port |
| Backplane Interface | VME 6U bus |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| PCB Protection | Base uncoated board (CA = standard conformal coated, CB = alternate coated revision) |
| Power Supply | 28 VDC nominal, operating range 18–32 VDC |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | RUN, FAIL, STATUS, TX/RX LED indicators, reset button |
| Mounting | Standard Mark VI VME rack slot installation, normally installed in slot 1 |
| Country of Origin | United States |
- Bus Function: VME bus master control and backplane communication arbitration
- Network Protocol: GE proprietary IONet / UDH protocol for deterministic turbine control
- Data Synchronization: Low-latency real-time data exchange for turbine control loops
- Diagnostics: Continuous self-testing, network status monitoring and fault reporting
- Signal Isolation: Isolated communication ports to suppress industrial electromagnetic interference
- Form Factor: 6U VME plug-in board
- System Role: Mandatory communication coordinator for Mark VI control racks
- Serial Function: Local configuration, firmware download and troubleshooting via RS-232
- System Architecture: Supports multi-rack distributed I/O and TMR redundant control cabinets
- Variant Note: IS215VCMIH2C is the base board; IS215VCMIH2CA and IS215VCMIH2CB are coated derivative versions
- Gas turbine Mark VI control rack internal communication coordination
- Steam turbine control and protection system real-time data exchange
- Combined cycle power plant distributed turbine control systems
- TMR redundant power generation control cabinets
- Cross-rack I/O expansion communication for Mark VI systems
- Power plant control cabinet maintenance, spare replacement and retrofit
- Oil & gas turbine-driven equipment control systems
- Critical rotating machinery high-reliability control network interface
- Act as VME bus master to manage communication between CPU and all local I/O boards inside the rack
- Transmit real-time control commands and collect analog/digital feedback data via three IONet channels
- Enable reliable data communication between main control racks and remote expansion racks
- Support TMR synchronization for redundant turbine control and protection systems
- Provide local serial diagnostic access for commissioning and troubleshooting
- Identify and manage hardware IDs of all modules and terminal boards within the VME rack
- Serve as base board for CA / CB coated variants and direct drop-in replacement spare board
- Support turbine control system overhaul, life extension and spare inventory management
We provide a 12-month limited warranty for the GE IS215VCMIH2C board. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.
The warranty does NOT cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance and fault diagnosis.
A: It is designed for the GE Mark VI Speedtronic turbine control system and acts as the rack communication master.
A: VCMI means VME Communication Master Interface, the main communication hub board for Mark VI racks.
A: IS215VCMIH2C is the base uncoated board; IS215VCMIH2CA and IS215VCMIH2CB are coated revision variants built from this base platform.
A: It is equipped with three 10Base2 IONet Ethernet ports and one RS-232 serial diagnostic port with reset button.
A: Yes, it supports both simplex and Triple Modular Redundancy (TMR) architectures for high-reliability turbine control.
A: Nominal 28 VDC, operating range 18–32 VDC.
A: No. It is a dedicated communication master board responsible for VME bus and IONet network data exchange.
A: The base H2C has no conformal coating; CA and CB add conformal coating for dust and moisture protection in industrial cabinets.
A: Yes, all units pass complete functional testing and quality inspection before delivery.
A: Confirm the full part number, verify rack slot compatibility, check power supply, confirm whether coating version is required, and follow GE Mark VI installation manuals.
VME 6U Bus Master Board
,GE VCMIH2C Communication Module
,IS215VCMIH2C Base Board Parts
-
IS215UCVGM09 GE Module Parts Universal Control Variable Generator Module / DLAN+ Communication Processor Card
GE IS215UCVGM09 Mark VI module features a 650 MHz processor, 128 MB SDRAM, and DLAN+ communication for reliable turbine control. Supports Modbus TCP, dual Ethernet, and offers optional conformal coating for harsh environments. 12-month warranty. -
IS215VCMIH2B GE Module Parts VME 6U Bus Master Communication Board
GE IS215VCMIH2B VME 6U Bus Master Board for Mark VI turbine control. Features TI DSP, 3 IONet ports, TMR redundancy, and 28VDC power. UL, CE, RoHS certified with 1-year warranty. Reliable industrial communication. -
ABB PFEA113-65 3BSE050092R65 Tension Electronics | IP65 Web Tension Controller with Profibus-DP
The ABB PFEA113-65 3BSE050092R65 is an IP65 field-mount web tension controller supporting up to 4 load cells, Profibus-DP, and rich I/O for easy PLC integration. Ideal for demanding multi-zone tension applications.