IS220PAICH1A GE Module Parts Analog Input / Output I/O Pack New
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Industrial Systems, USA |
| Part Number | IS220PAICH1A |
| Functional Acronym | PAIC |
| Series | Mark VIe Speedtronic Turbine Control System |
| Module Type | Analog Input / Output I/O Pack |
| Analog Input Channels | Up to 10 channels |
| Analog Output Channels | 2 channels |
| Input Signal Range | ±5 V, ±10 V, 0–20 mA, 4–20 mA (configurable current inputs) |
| Output Signal Type | 0–20 mA / 4–20 mA current output |
| Transmitter Power | Supplies 24 VDC field transmitter power |
| A/D Resolution | 16-bit |
| Communication Interface | Dual RJ45 10/100 Mbps Ethernet ports; IR infrared local diagnostic port |
| Field Connector | DC-37 pin D-sub connector to terminal board |
| Power Supply | 27.4 VDC minimum, 28.0 VDC nominal, 28.6 VDC maximum |
| Redundancy Support | Simplex or Triple Modular Redundancy (TMR) |
| Diagnostic Indicators | POWER, ATTN, LINK/ENET1, LINK/ENET2 LEDs |
| Protective Treatment | Conformal coated PCB |
| Operating Temperature | -30 °C to +65 °C (-22 °F to +149 °F) |
| Humidity | 5–95% non-condensing |
| Compatible Terminal Boards | IS200STAIH1A, IS200STAIH2A, IS200TBAIH1C |
| Certifications | UL E207865; ANSI/ISA 12.12.01-2015; Class I, Div. 2, Groups A/B/C/D; ATEX Zone 2 IIC (where applicable) |
| Installation | Standard VME rack mount (13-slot or 21-slot racks) |
| Country of Origin | United States |
- Signal Conditioning: Analog front-end with channel filtering and isolation
- Input Types: Voltage and current analog signals
- Conversion: High-resolution 16-bit A/D conversion
- Network: Ethernet-based distributed I/O communication with the Mark VIe controller
- Architecture: Distributed I/O pack, suitable for up to nine 21-bay VME rack I/O boards
- Isolation: Electrical isolation between field circuits and control ground
- Service Port: Infrared local port for configuration and diagnostics
- Indicators: Four front-panel status LEDs for power, attention, and Ethernet link
- Mechanical: Rack-mounted unit with D-sub field wiring connector
- Environmental: Designed for continuous operation in harsh industrial environments
- Gas turbine control and monitoring systems
- Steam turbine automation, speed control, and protection
- Power generation distributed control systems (DCS)
- Analog sensor signal acquisition and process feedback
- High-availability redundant industrial process control
- Mark VIe redundant and TMR control cabinet I/O
- Power plant auxiliary equipment monitoring and regulation
- Heavy industry closed-loop analog control loops
- Interface field analog sensors (pressure, temperature, speed, flow, level, vibration) with the Mark VIe controller
- Convert field analog signals into digital values for control logic and data acquisition
- Output analog control signals to actuators, valves, and drives
- Provide powered loops for 2-wire field transmitters
- Extend distributed I/O over Ethernet within turbine and plant control cabinets
- Serve as a drop-in replacement or spare module for existing Mark VIe installations
- Support retrofit, maintenance, and system expansion projects
We provide a 12-month limited warranty for the GE IS220PAICH1A module. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, we offer free repair or replacement for qualified faulty units. Every module is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuits, physical impact, moisture or corrosion, unauthorized repair or modification, or abnormal industrial abuse. Technical support is available for product consultation, wiring guidance, and fault diagnosis.
It is designed for the GE Mark VIe Speedtronic turbine control system and communicates with the Mark VIe controller over Ethernet.
The PAIC pack provides up to 10 analog input channels and 2 analog output channels.
Approved combinations are the IS200STAIH1A, IS200STAIH2A, and IS200TBAIH1C terminal boards. Approval applies to the complete I/O pack and terminal board combination.
Yes. The module supports both Simplex and Triple Modular Redundancy (TMR) architectures for high-availability applications.
Nominal supply is 28.0 VDC, with an operating range of 27.4 VDC to 28.6 VDC.
Yes. It is approved for hazardous and non-hazardous locations, including Class I, Division 2, Groups A, B, C, D environments, subject to the approved terminal board combination.
GE Analog I/O Pack
,IS220PAICH1A Module Parts
,GE Analog Input Output Module
-
IS215WEPAH2BB GE Module Parts Pitch Control Analog I/O PCB / Plug-in Rack Module
GE IS215WEPAH2BB Pitch Control Analog I/O PCB for Mark VIe wind turbines. Features 125 VDC power, -40°C to 70°C range, 50A rating, and TMR redundancy support. UL/CE certified with 1-year warranty and conformal coating for durability. -
ABB PFSK152 3BSE018877R2 Signal Concentrator Board | In Stock
The ABB PFSK152 3BSE018877R2 Signal Concentrator Board offers high-speed fiber optic communication, robust signal processing, and reliable performance in harsh industrial environments. It is compact, easy to integrate, and comes with a 1-year warranty. In stock and ready to ship. -
IS220PAOCH1A GE Module Parts Mark VIe Analog Output Module
GE IS220PAOCH1A Mark VIe analog output module offers 8-channel 0–20 mA output, 16-bit resolution, ±0.25% accuracy, dual Ethernet, and current feedback. Plug-and-play, 1-year warranty, compatible with GE systems.