IS215VPROH2B GE Module Parts Turbine Emergency Trip Protection Base Board
The GE IS215VPROH2B is the base VPRO turbine emergency protection assembly board for the GE Mark VI Speedtronic turbine control system. It serves as an independent high-integrity safety protection module for emergency overspeed detection, turbine trip logic, and safety shutdown execution.
This base board is the foundation variant for the IS215VPROH2BC and IS215VPROH2BD versions. It accepts magnetic pickup speed signals, thermocouple inputs, 4-20mA analog signals, and discrete trip contact inputs, and drives trip relay outputs to TPRO and TREG terminal boards.
Equipped with a dedicated independent protection processor, it delivers fast deterministic trip response separate from the main control processor, supporting simplex and Triple Modular Redundancy (TMR) configurations for power generation safety loops. It features front-panel diagnostic LEDs and an IONet communication interface.
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Number | IS215VPROH2B |
| Functional Acronym | VPRO (Turbine Protection) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | Turbine Emergency Trip Protection Base Board |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| Input Signals | Magnetic pickup speed signals, thermocouple inputs, 4-20mA analog inputs, discrete trip contact signals |
| Output Signals | Trip relay outputs for shutdown solenoids and trip circuits |
| Communication | IONet Ethernet interface |
| Internal Processing Frame Rate | 100 Hz |
| MPU Input Sensitivity | Minimum 27 mV peak at 2 Hz |
| Pulse Input Range | 2 Hz to 20 kHz |
| Power Supply | 125 VDC nominal, operating range 70–140 VDC |
| PCB Protection | Base uncoated board (BC = standard conformal coated, BD = heavy conformal coated) |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | Front-panel LED status indicators (RUN, FAIL, STATUS) |
| Compatible Terminal Boards | TPRO, TREG terminal boards |
| Mounting | Standard Mark VI VME rack slot installation |
| Cooling | Natural convection |
| Country of Origin | United States |
- Protection Functions: Emergency Overspeed (EOS), turbine emergency trip, synchronization check, fault interlock protection
- Processing Mode: Independent high-speed protection processor, isolated from main control logic
- Trip Response: Fast deterministic response for safety protection loops
- Signal Isolation: Galvanic isolation between field sensors and internal logic circuits
- Diagnostics: Continuous onboard self-testing and fault indication
- Form Factor: VME rack plug-in board
- System Architecture: Independent protection subsystem, decoupled from routine control functions
- Solenoid Drive: Supports trip solenoid driving for turbine shutdown circuits
- System Compatibility: Works with Mark VI Speedtronic gas and steam turbine control cabinets
- Variant Note: This base board can be supplied as BC (standard coating) or BD (heavy coating) for different environmental requirements
- Gas turbine safety protection and emergency trip systems
- Steam turbine overspeed protection and safety interlock control
- Combined cycle power plant Mark VI control cabinet redundant protection subsystems
- Turbine-driven equipment safety monitoring in the oil & gas industry
- Power plant maintenance, spare replacement, and system retrofit projects
- High-reliability TMR safety protection cabinets for critical rotating machinery
- Generator protection and emergency shutdown control systems
- Monitor turbine rotational speed via magnetic pickups and trigger emergency overspeed trip
- Process thermocouple temperature signals and analog process parameters for protection interlocks
- Execute hardwired turbine trip logic and output relay commands to trip solenoids and shutoff devices
- Provide independent safety protection, separated from the main turbine control function
- Support simplex and TMR redundant protection architectures for high safety integrity
- Serve as base board for BC / BD coated variants and direct drop-in replacement for existing Mark VI VPRO racks
- Support turbine control system overhaul, life extension, and spare inventory management
We provide a 12-month limited warranty for the GE IS215VPROH2B board. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage, or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance, and fault diagnosis.
It is designed for the GE Mark VI Speedtronic turbine control system and works as an independent turbine protection subsystem.
VPRO is the functional abbreviation for turbine protection board, dedicated to overspeed and emergency trip protection.
IS215VPROH2B is the base board; IS215VPROH2BC is the standard conformal coated version; IS215VPROH2BD is the heavy conformal coated version for corrosive, high-humidity environments.
Yes, it supports both simplex and Triple Modular Redundancy (TMR) architectures for high safety integrity.
Nominal 125 VDC, with an operating range of 70–140 VDC.
Magnetic pickup speed signals, thermocouple inputs, 4-20mA analog inputs, and discrete trip contact signals.
GE Turbine Emergency Trip Module
,IS215VPROH2B Protection Base Board
,GE Module Parts Turbine Protection
-
IS215UCVGM09 GE Module Parts Universal Control Variable Generator Module / DLAN+ Communication Processor Card
GE IS215UCVGM09 Mark VI module features a 650 MHz processor, 128 MB SDRAM, and DLAN+ communication for reliable turbine control. Supports Modbus TCP, dual Ethernet, and offers optional conformal coating for harsh environments. 12-month warranty. -
IS215VCMIH2C GE Module Parts VME 6U Bus Master Communication Base Board
GE IS215VCMIH2C VME 6U Bus Master Communication Board for Mark VI turbine control. Features TI DSP, 3 IONet ports, TMR redundancy support, and plug-and-play installation. Fully tested with 12-month warranty and technical support. -
IS215WEMAH1BA GE Module Parts Wind Energy Main Cabinet Control PCB in stock
GE IS215WEMAH1BA Mark VIe wind turbine control PCB features conformal coating, TMR support, and 0-20mA output for harsh environments. UL/CE certified, plug-and-play, with 1-year warranty and in-stock availability.