IS215VCMIH2CA GE Module Parts VME 6U Bus Master Communication Interface Board Brands New
The GE IS215VCMIH2CA is a VCMI (VME Communication Master Interface) board designed for the GE Mark VI Speedtronic turbine control system. It serves as the VME bus master and core rack communication hub, responsible for backplane arbitration and real-time data exchange between the rack processor, local I/O modules, expansion racks, and the IONet control network.
The board adopts a TMS320C32 32-bit floating-point DSP processor and is equipped with three independent 10Base2 IONet Ethernet ports and one RS-232 serial diagnostic port. This CA version is conformal coated and supports simplex and Triple Modular Redundancy (TMR) architectures to realize deterministic synchronous control for gas turbines, steam turbines, and combined cycle units. Front-panel LED indicators and a reset button facilitate on-site commissioning and fault troubleshooting.
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Number | IS215VCMIH2CA |
| Functional Acronym | VCMI (VME Communication Master Interface) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | VME 6U Bus Master Communication Interface Board |
| Processor | TI TMS320C32 32-bit floating-point DSP |
| Dual-Port Memory | 32 KB |
| IONet Ports | 3 × 10Base2 Ethernet ports (R, S, T channels) |
| Diagnostic Port | RS-232 serial port |
| Backplane Interface | VME 6U bus |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| PCB Protection | Conformal coated |
| Power Supply | 28 VDC nominal, operating range 18–32 VDC |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | RUN, FAIL, STATUS, TX/RX LED indicators, reset button |
| Mounting | Standard Mark VI VME rack slot installation, normally installed in slot 1 |
| Country of Origin | United States |
- Bus Function: VME bus master control, backplane communication arbitration
- Network Protocol: GE proprietary IONet / UDH protocol for deterministic turbine control
- Data Synchronization: Low-latency real-time data exchange for turbine control loops
- Diagnostics: Continuous self-testing, network status monitoring, and fault reporting
- Signal Isolation: Isolated communication ports to suppress industrial electromagnetic interference
- Form Factor: 6U VME plug-in board
- System Role: Mandatory communication coordinator for Mark VI control racks
- Serial Function: Local configuration, firmware download, and troubleshooting via RS-232
- System Architecture: Supports multi-rack distributed I/O and TMR redundant control cabinets
- Variant Note: IS215VCMIH2CA is the CA conformal coated variant; IS215VCMIH2CB is another coated revision variant
- Gas turbine Mark VI control rack internal communication coordination
- Steam turbine control and protection system real-time data exchange
- Combined cycle power plant distributed turbine control systems
- TMR redundant power generation control cabinets
- Cross-rack I/O expansion communication for Mark VI systems
- Power plant control cabinet maintenance, spare replacement, and retrofit
- Oil & gas turbine-driven equipment control systems
- Critical rotating machinery high-reliability control network interface
- Act as VME bus master to manage communication between CPU and all local I/O boards inside the rack
- Transmit real-time control commands and collect analog/digital feedback data via three IONet channels
- Enable reliable data communication between main control racks and remote expansion racks
- Support TMR synchronization for redundant turbine control and protection systems
- Provide local serial diagnostic access for commissioning and troubleshooting
- Identify and manage hardware IDs of all modules and terminal boards within the VME rack
- Serve as direct drop-in replacement spare board for existing Mark VI VCMI racks
- Support turbine control system overhaul, life extension, and spare inventory management
We provide a 12-month limited warranty for the GE IS215VCMIH2CA board. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.
The warranty does NOT cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage, or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance, and fault diagnosis.
A: It is designed for the GE Mark VI Speedtronic turbine control system and acts as the rack communication master.
A: VCMI means VME Communication Master Interface, the main communication hub board for Mark VI racks.
A: It is equipped with three 10Base2 IONet Ethernet ports and one RS-232 serial diagnostic port with reset button.
A: Yes, it supports both simplex and Triple Modular Redundancy (TMR) architectures for high-reliability turbine control.
A: Nominal 28 VDC, operating range 18–32 VDC.
A: Both are VCMI communication boards for Mark VI; CA and CB are different coated revision variants. Confirm the required part number before replacement.
GE VME Bus Master Board
,IS215VCMIH2CA Communication Interface Module
,6U VME Interface Board
-
IS215UCVGH1A GE Module Parts UCVG Universal Control Variable Generator / VME Single Board Controller
GE IS215UCVGH1A UCVG VME controller for Mark VI turbine systems. Features 650MHz CPU, dual Ethernet, Modbus TCP, and 1-year warranty. Reliable real-time control with IEC, UL, CE certifications. Conformal coating optional for harsh environments. -
ABB PFTL101A-2.0kN 3BSE004172R1 Pressductor Load Cell | In Stock
ABB PFTL101A-2.0kN Pressductor load cell offers 500% overload protection, 0.5% FS accuracy, and no mechanical fatigue for reliable web tension control. CE, UL, RoHS certified; in stock. -
ABB PFEA113-65 3BSE050092R65 Tension Electronics | IP65 Web Tension Controller with Profibus-DP
The ABB PFEA113-65 3BSE050092R65 is an IP65 field-mount web tension controller supporting up to 4 load cells, Profibus-DP, and rich I/O for easy PLC integration. Ideal for demanding multi-zone tension applications.