IS215VCMIH2B GE Module Parts VME 6U Bus Master Communication Board
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Number | IS215VCMIH2B |
| Functional Acronym | VCMI (VME Communication Master Interface) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | VME 6U Bus Master Communication Board |
| Processor | TI TMS320C32 32-bit floating-point DSP |
| Dual-Port Memory | 32 KB |
| IONet Ports | 3 × 10Base2 Ethernet ports (R, S, T channels) |
| Diagnostic Port | RS-232 serial port |
| Backplane Interface | VME 6U bus |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| PCB Protection | Base uncoated board (BB is coated derivative variant) |
| Power Supply | 28 VDC nominal, operating range 18–32 VDC |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | RUN, FAIL, STATUS, TX/RX LED indicators, reset button |
| Mounting | Standard Mark VI VME rack slot installation, normally installed in slot 1 |
| Country of Origin | United States |
| Bus Function | VME bus master control, backplane communication arbitration |
|---|---|
| Network Protocol | GE proprietary IONet / UDH protocol for deterministic turbine control |
| Data Synchronization | Low-latency real-time data exchange for turbine control loops |
| Diagnostics | Continuous self-testing, network status monitoring and fault reporting |
| Signal Isolation | Isolated communication ports to suppress industrial electromagnetic interference |
| Form Factor | 6U VME plug-in board |
| System Role | Mandatory communication coordinator for Mark VI control racks |
| Serial Function | Local configuration, firmware download and troubleshooting via RS-232 |
| System Architecture | Supports multi-rack distributed I/O and TMR redundant control cabinets |
| Variant Note | IS215VCMIH2B is the older base version; IS215VCMIH2C / CA / CB are later revised versions |
- Gas turbine Mark VI control rack internal communication coordination
- Steam turbine control and protection system real-time data exchange
- Combined cycle power plant distributed turbine control systems
- TMR redundant power generation control cabinets
- Cross-rack I/O expansion communication for Mark VI systems
- Power plant control cabinet maintenance, spare replacement and retrofit
- Oil & gas turbine-driven equipment control systems
- Critical rotating machinery high-reliability control network interface
- Acts as VME bus master to manage communication between the CPU and all local I/O boards inside the rack
- Transmits real-time control commands and collects analog/digital feedback data via three IONet channels
- Enables reliable data communication between main control racks and remote expansion racks
- Supports TMR synchronization for redundant turbine control and protection systems
- Provides local serial diagnostic access for commissioning and troubleshooting
- Identifies and manages hardware IDs of all modules and terminal boards within the VME rack
- Serves as a direct drop-in replacement spare board for existing Mark VI VCMI racks
- Supports turbine control system overhaul, life extension and spare inventory management
We provide a 12-month limited warranty for the GE IS215VCMIH2B board. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance and fault diagnosis.
It is designed for the GE Mark VI Speedtronic turbine control system and acts as the rack communication master.
VCMI means VME Communication Master Interface, the main communication hub board for Mark VI racks.
The IS215VCMIH2B is the earlier base revision; the IS215VCMIH2C is the updated base version with CA/CB coated options. They are not fully interchangeable — confirm firmware and rack compatibility before replacement.
It is equipped with three 10Base2 IONet Ethernet ports and one RS-232 serial diagnostic port with a reset button.
Yes, it supports both simplex and Triple Modular Redundancy (TMR) architectures for high-reliability turbine control.
Nominal 28 VDC, with an operating range of 18–32 VDC.
GE VME 6U Bus Master Board
,IS215VCMIH2B Communication Module
,GE Module Parts VME Board
-
IS215VPROH2B GE Module Parts Turbine Emergency Trip Protection Base Board
The GE IS215VPROH2B is a high-integrity turbine emergency trip protection base board for Mark VI systems. It offers independent overspeed detection, fast deterministic trip response, and supports simplex or TMR redundancy. Features include IONet communication, front-panel diagnostics, and compatibility with TPRO/TREG boards. Ideal for power generation safety loops, with a 12-month warranty. -
ABB PFSK160A 3BSE009514R1 Digital Output Relay Module | In Stock
The ABB PFSK160A 3BSE009514R1 digital output relay module offers reliable electrical isolation and high load capacity for driving valves, contactors, and alarms. Its precise order number ensures compatibility, enabling seamless in-situ replacement and minimizing downtime for legacy systems. -
ABB PFSA103C 3BSE002488R1 | ABB Tension System Module / STU Unit
ABB PFSA103C 3BSE002488R1 tension system module/STU unit ensures reliable web tension control with 24V DC, -40~150C range, IEC 60947 compliance, and 1-year warranty. Original ABB quality reduces downtime; confirm compatibility before purchase.