IS215UCVHM06A IS415UCVHH1A B VET2-A21010 350-9300007672-12F010 A1 GE Module Parts VME 6U Main Processor Controller Board New
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Numbers |
IS215UCVHM06A (UCV main board assembly) IS415UCVHH1A / IS415UCVHH1B (heatsink & front panel assembly, Rev A / Rev B) VET2-A21010 (internal component part number) 350-9300007672-12F010 A1 (sub-component serial/part code) |
| Functional Acronym | UCV (Universal Control VME Controller) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | VME 6U Main Processor Controller Board |
| Processor | High-performance embedded CPU for turbine control |
| Memory | Onboard RAM & Flash for firmware, control logic and historical data |
| Backplane Interface | VME 6U bus |
| Network | Communicates with rack VCMI via IONet |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| Cooling | Passive heatsink (IS415UCVHH1A/B) |
| PCB Protection | Conformal coated |
| Power Supply | 28 VDC via VME backplane |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | RUN, FAIL, STATUS, COMM LED indicators |
| Mounting | Standard Mark VI VME rack slot installation |
| Country of Origin | United States |
- Core Function: Execute turbine control, sequencing, fuel control, excitation control and protection logic
- Control Loop: High-speed closed-loop control for speed, temperature, load and fuel stroke
- Communication: VME backplane communication with VCMI and all rack I/O modules
- Diagnostics: Continuous self-test, watchdog monitoring, fault logging and control mismatch detection for TMR
- Form Factor: 6U VME single-slot plug-in controller
- System Role: Main computing core of the Mark VI control rack
- Firmware: Mark VI control firmware; logic download via VCMI serial port or IONet
- Variant Note: IS415UCVHH1B is the revised heatsink/panel version of IS415UCVHH1A and must match the main board revision
- Gas turbine Mark VI main control rack core controller
- Steam turbine control and protection system
- Combined cycle power plant unit control cabinets
- TMR redundant turbine control cabinets
- Power plant spare replacement, control system retrofit and overhaul
- Oil & gas turbine-driven compressor control systems
- Critical rotating machinery safety and regulation control
- Run the main turbine control program and protection algorithms
- Process analog and digital I/O signals received from I/O boards
- Execute speed control, fuel control, temperature control and load control logic
- Perform TMR voting and signal comparison in redundant racks
- Exchange real-time control data with VCMI and remote racks over IONet
- Store fault logs, event records and unit operating parameters
- Serve as a direct drop-in replacement spare for existing Mark VI UCV assemblies
- Support unit commissioning, tuning and long-term operation protection
We provide a 12-month limited warranty for the GE IS215UCVHM06A assembly. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every board is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance and fault diagnosis.
A: It is the main UCV controller for the GE Mark VI Speedtronic turbine control system.
A: UCV stands for Universal Control VME, the main CPU processor board for Mark VI racks.
A: IS215UCVHM06A is the main circuit board; IS415UCVHH1A/B is the matched heatsink and front panel assembly. They are used together as a complete set.
A: They are internal sub-component part numbers of this UCV assembly, not standalone board part numbers.
A: Yes, it supports simplex and Triple Modular Redundancy (TMR) architecture.
A: No. It requires a VCMI board in the same rack to handle VME bus arbitration and IONet communication.
GE VME 6U processor board
,GE main controller module parts
,IS215UCVHM06A controller board new
-
IS215UCVGM09 GE Module Parts Universal Control Variable Generator Module / DLAN+ Communication Processor Card
GE IS215UCVGM09 Mark VI module features a 650 MHz processor, 128 MB SDRAM, and DLAN+ communication for reliable turbine control. Supports Modbus TCP, dual Ethernet, and offers optional conformal coating for harsh environments. 12-month warranty. -
IS220PAICH1A 336A4940CSP3 GE Module Parts Analog I/O Pack New
GE IS220PAICH1A (336A4940CSP3) Mark VIe analog I/O pack: 10 AI/2 AO channels, 16-bit resolution, dual Ethernet, TMR redundancy, conformal-coated PCB, UL/ATEX certified, plug-and-play VME mount, 1-year warranty. -
ABB PFSA103C 3BSE002488R1 | ABB Tension System Module / STU Unit
ABB PFSA103C 3BSE002488R1 tension system module/STU unit ensures reliable web tension control with 24V DC, -40~150C range, IEC 60947 compliance, and 1-year warranty. Original ABB quality reduces downtime; confirm compatibility before purchase.