IS215VCMIH2CA IS200VCMIH2CAA GE Module Parts VME 6U Bus Master Communication Interface Board in Stock
| Brand | General Electric (GE) |
|---|---|
| Manufacturer | GE Vernova |
| Part Number | IS215VCMIH2CA (complete assembly), IS200VCMIH2CAA (base PCB) |
| Functional Acronym | VCMI (VME Communication Master Interface) |
| Series | Mark VI Speedtronic Turbine Control System |
| Module Type | VME 6U Bus Master Communication Interface Board |
| Processor | TI TMS320C32 32-bit floating-point DSP |
| Dual-Port Memory | 32 KB |
| IONet Ports | 3 × 10Base2 Ethernet ports (R, S, T channels) |
| Diagnostic Port | RS-232 serial port with screw lock |
| Backplane Interface | VME 6U bus |
| Redundancy Support | Simplex and Triple Modular Redundancy (TMR) |
| PCB Protection | Conformal coated |
| Power Supply | 28 VDC nominal, operating range 18–32 VDC |
| Operating Temperature | 0 °C ~ +60 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10–95% non-condensing |
| Diagnostic Indicators | RUN, FAIL, STATUS, TX/RX LED indicators, reset button |
| Mounting | Standard Mark VI VME rack slot installation, usually installed in slot 1 |
| Country of Origin | United States |
- Bus Function: VME bus master control, backplane communication arbitration
- Network Protocol: GE proprietary IONet / UDH protocol for turbine deterministic control
- Data Synchronization: Low-latency real-time data exchange for turbine control loops
- Diagnostics: Continuous self-testing, network status monitoring and fault reporting
- Signal Isolation: Isolated communication ports to suppress industrial electromagnetic interference
- Form Factor: 6U VME plug-in board
- System Role: Mandatory communication coordinator for Mark VI control racks
- Serial Function: Local configuration, firmware download and troubleshooting via RS-232
- System Architecture: Supports multi-rack distributed I/O and TMR redundant control cabinets
- Variant Note: IS215VCMIH2CA is the CA conformal coated version; IS215VCMIH2CB is the alternate coated variant
- Gas turbine Mark VI control rack internal communication coordination
- Steam turbine control and protection system real-time data exchange
- Combined cycle power plant distributed turbine control systems
- TMR redundant power generation control cabinets
- Cross-rack I/O expansion communication for Mark VI systems
- Power plant control cabinet maintenance, spare replacement and retrofit
- Oil & gas turbine-driven equipment control systems
- Critical rotating machinery high-reliability control network interface
- Serve as VME bus master to manage communication between CPU and all local I/O boards inside the rack
- Transmit real-time control commands and collect analog/digital feedback data via three IONet channels
- Enable reliable data communication between main control racks and remote expansion racks
- Support TMR synchronization for redundant turbine control and protection systems
- Provide local serial diagnostic access for commissioning and troubleshooting
- Identify and manage hardware IDs of all modules and terminal boards within the VME rack
- Serve as direct drop-in replacement spare board for existing Mark VI VCMI racks
- Support turbine control system overhaul, life extension and spare inventory management
We provide a 12-month limited warranty for the GE IS215VCMIH2CA / IS200VCMIH2CAA assembly. The warranty covers functional failures caused by manufacturing defects under normal installation and operating conditions. During the warranty period, qualified faulty units are eligible for free repair or replacement. Every assembly is fully tested and inspected before shipment.
The warranty does not cover damage caused by improper installation, overvoltage, short circuit, physical impact, corrosion, unauthorized modification, ESD damage or abnormal industrial misuse. Technical support is available for product consultation, wiring guidance and fault diagnosis.
It is designed for the GE Mark VI Speedtronic turbine control system and acts as the rack communication master.
VCMI means VME Communication Master Interface, the main communication hub board for Mark VI racks.
IS200VCMIH2CAA is the base PCB; IS215VCMIH2CA is the complete finished board assembly including front panel and hardware.
It is equipped with three 10Base2 IONet Ethernet ports and one RS-232 serial diagnostic port with reset button.
Yes, it supports both simplex and Triple Modular Redundancy (TMR) architectures for high-reliability turbine control.
Nominal 28 VDC, operating range 18–32 VDC.
GE VME 6U Bus Master Board
,IS215VCMIH2CA Communication Interface Module
,IS200VCMIH2CAA GE Module Parts
-
IS215UCVGM06A IS215UCVGH1A VMIVME-7666-111000 GE Module Parts UCVG Universal Control Variable Generator / VME Single Board Controller
GE Mark VI UCVG controller (IS215UCVGM06A/H1A, VMIVME-7666) offers durable 6U VME real-time processing with Intel Celeron, dual Ethernet, Modbus TCP, and QNX OS. Ideal for turbine control retrofits; includes 12-month warranty and optional conformal coating for harsh environments. -
IS215VPROH2B GE Module Parts Turbine Emergency Trip Protection Base Board
The GE IS215VPROH2B is a high-integrity turbine emergency trip protection base board for Mark VI systems. It offers independent overspeed detection, fast deterministic trip response, and supports simplex or TMR redundancy. Features include IONet communication, front-panel diagnostics, and compatibility with TPRO/TREG boards. Ideal for power generation safety loops, with a 12-month warranty. -
IS215WEPAH2BB GE Module Parts Pitch Control Analog I/O PCB / Plug-in Rack Module
GE IS215WEPAH2BB Pitch Control Analog I/O PCB for Mark VIe wind turbines. Features 125 VDC power, -40°C to 70°C range, 50A rating, and TMR redundancy support. UL/CE certified with 1-year warranty and conformal coating for durability.